Design and function
Transport and installation
099-700003-EW501
14.09.2020
17
5.2.4 Operating elements in the machine
This setting affects the torch types 2U/D, and RD2.
Figure 5-1
• Switch the"Program or up/down mode“ changeover switch at the welding machine to the up/down or
program mode position (see chapter "Design and function").
The 'Program or up/down function' changeover switch may look different on your machine. Use
the operating instructions for your power source to operate the switch.
5.2.5 Operating elements 2 for up/down welding torch
Figure 5-2
Item Symbol Description
0
1
"B -" button (program mode)
Decrease JOB number
"B -" button (up/down mode)
Welding voltage correction, decrease value
2
"B +" button (program mode)
Increase JOB number
"B +" button (up/down mode)
Welding voltage correction, increase value
3
"A -" button (Program mode)
Decrease program number
"A -" button (Up/Down mode)
Reduce welding performance (welding current/wire-feed speed)
4
"A +" button (Program mode)
Increase program number
"A +" button (Up/Down mode)
Increase welding performance (welding current/wire-feed speed)
