Design and function
MIG/MAG welding
72
099-005402-EW501
24.11.2016
5.3.10.1 Selecting parameters (program A)
Changes to the welding parameters can only be made when the key switch is in position "1".
Figure 5-53
Select program number.
5.3.11 MIG/MAG automatic cut-out
The welding machine ends the ignition process or the welding process with an
• ignition fault (no welding current flows within 5 s after the start signal)
• arc interruption (arc is intrerrupted for longer than 5 s)