Design and function
MIG/MAG welding
099-005402-EW501
24.11.2016
47
5.3.6.2 Arc length correction setting
When required, the arc length (welding voltage) can be adjusted for the welding task in hand by +/
– 9.9 V.
Figure 5-24
5.3.6.3 Accessory components for operating point setting
The operating point can be set at various accessory components as well, such as remote control, special
welding torches or robot and industrial bus interfaces (optional interface for automated welding required,
not available for all machines of this series).
For an overview of the accessory components
> see 9 chapter
. See the operating instructions for the
machine in question for a more detailed description of the individual machines and their functions.
