CONV Bosch To Pelco - firmware 0.01.xx
Ewimar Sp. z o.o.
www.ewimar.pl
Made in Poland
Variable-Start-Stop (optocode 0x08) -
The command sending only the START at intervals up to every
50ms (20Hz), with information about the speed of movement. Used with Bosch DVR’s and Video Matrix.
It is not recommended to radio transmission and LAN network using the LAN to RS-485 converters.
Fine Speed PTZ (optocode 0x09)
– The command sending START and STOP including information
about the high precision speed of movement. During translation the movement speed is converted to
range used in Pelco protocols.
Connection structure
The converter has one input port for Bosch (Biphase / OSRD) and two Pelco output ports, each of which
is freely configurable as Pelco-D or Pelco-P. It is installed between a Bosch control device (PTZ
keyboard, DVR, Video Matrix, Encoder, etc) and other Speed Dome cameras. Can be located anywhere
between control device and PTZ cameras..
PORT 1
Biphase / OSRD
(RS-485)
PORT 3
Bosch
PTZ
keyboard
Pelco Speed Dome
PORT 2
Pelco-D / Pelco-P
Pelco-D / Pelco-P
Bosch
Speed Dome
Bosch->Pelco
Bosch
Video Matrix / DVR
The basic way to connect a Pelco Speed Dome to Bosch CCTV system
Description of configuration and connection elements
1
10
POWER / COMMUNICATION PORTS
USB LED DIODES DIP SWITCHES
