9
4.
Hold the filter following the illustration below, rotate the HEPA assembly in the unlocking
direction, and then take the HEPA assembly outwards to clean the dust. The HEPA filter
is suitable for hand washing in water, but must be completely dry before re-use. Install
the filter assembly by aligning the symbols and rotate the filter to lock in place.
5. Clean or replace the UV lamp
o
Although the penetration of ultraviolet light is strong, dust, or stains on the tube
will have a direct impact on UV lamp
’
s penetration ability. The quartz lamp
should be regularly cleaned, so the performance will not be affected.
o
First, make sure the machine is turned off, then turn the machine over, remove
the screw with a cross screwdriver, then open the UV lamp cover and remove the
UV lamp assembly (with lamp holder)
o
After the UV lamp assembly is removed, pinch the lamp head as shown, and
remove the lamp from the lamp holder. Similarly, remove the other end. The
lamp is a fragile part and needs to be carefully cleaned after removing the lamp.
Align the symbols to reassemble
Use
cross-head
screwdriver to
open
