6
Operating Instruction
1. Insert the hand held cleaner into the UV unit head (as the direction shown in the figure)
and, when it is in place, press the button on the back of the vacuum cleaner to make sure
this is securely in place
2. Plug the power cable into the socket and turn on the power, then press the power switch
button on the handset, the power light and the UV light will come on, and the machine
begins to work. Press the power switch again to turn off.
3. Place the machine on the items to be cleaned (e.g. blankets, sheets, sofas, clothes, etc.).
The UV lamp under the dust container in the front of the machine lights up, indicating that
the UV lamp has started to work and then move the machine forwards and backwards slowly
to clean the items. Do not raise the unit from the surface as this will turn the UV off for your
protection. The recommended cleaning time is no less than 20 seconds per metre,
backwards and forwards three times.
4. If you need to use the vibrator function, you can press the vibrator switch above the UV
head (item 11/14). Vibrator function is only operational with main power switch on (Item 6)
but vibrator switch can also be turned off.
Note: The machine has a 3-point protection switch, if the machine is raised too high or
turned over then the UV lamp will automatically go off. Please ensure the unit keeps
contact with the surface or the UV will stop working.
Power switch
Power indicator
window
