18
OPERA
TING INSTRUC
TIONS
ATTACHMENT APPLICATIONS
Adjustable spray nozzle:
great for general washing with variable spray ranging from fan
spray to jet power spray.
Turbo nozzle:
use for removing tough areas of dirt with a concentrated jet spray.
Patio Cleaner:
great for cleaning patios, decking and pathways.
Rim Brush:
ideal for cleaning wheel arches rims and alloys. Also underneath of garden furniture
and hard to reach areas.
Rotating brush:
for car body, the constant rotation of the brush saves pressure by the operator
and prevents scratching paint work.
NOTE:
• Rotation brush need to be use with an additional adapter
• It is best to apply this adapter to the rotation brush first before connecting
• Push down hard and screw until tight
• With adapter place insert at the end of the other adapter already connected extension
lance B
DETERGENT OPERATION
• When using detergent, attach the High Pressure Foam Sprayer (Fig.13) directly onto the end
of the extension lance until it “clicks” and turn to lock in place
• When using the high-pressure detergent bottle, fill it with a properly formulated detergent or
cleaner with a water ratio according to instructions on the container (Fig.14)
• The detergent bottle comes with a straw which is fitted into the screw-on top
• If you do not see the straw, look inside the bottle and attach it to the screw-on top
SNOW FOAM:
this
attachment creates a thick layer of cleaning
foam that stays on surfaces longer and increases the chemical/
soap action time to provide a deaper clean than standard foam
sprayers - ideal for getting the perfect finish when washing the
car
NOTE:
• When using detergent, attach the high pressure snow
foam bottle/nozzle directly onto the end of the lance
(B) until it “clicks” and turn to lock in place then screw
red part tight to secure
• When using the high-pressure snow foam bottle, fill
it with a properly formulated detergent or cleaner
(designed for pressure washers) with a water, ratio
according to instructions on the detergent container.
• The snow foam bottle comes with a straw which is fitted
into the screw-on top. If you do not see the straw, look
inside the bottle and attach it to the screw-on top.
• When in operation the snow foam detergent nozzle can
be changed for desired effect.
• Twist the black end of the nozzle
• Turn clockwise to decrease the foam and anti-clockwise
to increase the foam
• Turn the red dial on the side of the snow foam head this
increases or decreases the amount of detergent used.
Indicator on the dial with show the flow amount
Fig.13
Fig.14
