EVX e-LINK 1013, User Instructions

Page: 4 / 28

3
EVM Solutions (Pty) Ltd 210 Main Street, Somerset West, Western Cape, South Africa, 7130
info@evx.co.za Support : 07 28 42 42 82 www.evx.co.za
Document Number: 100-(1011-3)-301-3
Getting to know your product.
This e-Bike use the concept of “ Pedal Assist ”, also known as “Pedelec”, (pedal electric cycle) where the
rider's pedaling is assisted by a small electric motor. Pedelec’s include an electronic controller which control
and cuts power to the motor when the rider is not pedaling or when a certain speed is obtained.
Pedelecs are useful for people who ride in hilly areas or in strong headwinds.
We recommend that you ride your bike with the power off at first, to get familiar with your e-Bike’s braking
and gear shifting until you are familiar and comfortable with the controls and the “feel”, you can then start
testing the assist levels incrementally to get comfortable with the optimal settings for you
.
Charging the Battery
The EVx Electric e-Bike’s comes with a high-capacity Lithium Ion rechargeable battery. The battery needs to
be fully charged before your first use. The intelligent charger that came with your e-Bike will control the
battery pack charging and will automatically end charging when the battery is fully charged. Make sure your
battery is fully charged before you go on a long trip.
The battery can be charged on your bike or you can remove it from the e-Bike to charge it at a convenient
location inside your house or at a charging station (See Removing Battery pack later in this document)
To charge the battery:
Be sure the e-Bike is powered off.
Be sure to always use
only the charger supplied with the product. (Using another charger may void
your battery warranty)
The charger must be plugged into a 220/230 50 Hz AC supply. (The usual power outlet available in a
South African home)
Onboard charging:

Stand on the left side and locate the charge port cover on the bottom of the battery pack.

Lift the rubber dust cap away to expose the DC charge port.

Carefully, plug the charger into the charger port

Connect the AC power cable into the charger and plug the cable into the power outlet.

The charger will automatically start charging if the battery needs to be charged.

When the charger is charging the battery, the indicator LED will turn RED.
 When the charger is complete, the charger will turn GREEN.
 Charging takes between 1 and 6 hours, depending on battery size and initial charge level. (see
verifying battery charge level further in the document)
 When the pack is fully charged, the charger’s light will change from amber to green and
automatically stop charging.
 Disconnect the charger from the wall. Remove the charger plug from battery and close the
rubber dust cap.

Use your battery often so it exercises the cells and is kept healthy
3.PREPERATION FOR FIRST USE