Issue 1.2 May 2020
EVSE Protocol Controller 2.0 (EPC 2.0) | Viridian EV
3
2 .
SAFETY INSTRUCTIONS
2.1 CAUTIONS & DANGERS
CAUTION: PLEASE OBSERVE THE SAFETY INSTRUCTIONS AND LEGAL NOTES
Installation requirements for electrical equipment and EVSE vary by country and jurisdiction. It is the responsibility of the
installer/user of this product to ensure that legal installation requirements are met. In the UK, this product must be
installed and used by a competent and qualified person who will ensure the equipment adheres to the IEE wiring
regulations BS7671 (18th Edition or later) and current Building regulations. This device has safety features that enable
and help with meeting these regulations.
DANGER
:
VOLTAGE HAZARDS
Contact with live components can result in serious injuries. Disconnect the system and all devices from the power supply
before starting work.
2.2 FUSES
WARNING
:
UNDESIRABLE HEAT GENERATION OR FIRE DUE TO INADEQUATE FUSING.
The internal fuses are designed only to protect the device itself. The system installer and plant operator are responsible
for the necessary line protection.
The relay outputs are not fused within the device. Without appropriate protection of the relay outputs, overloading can
cause undesirable heat generation or even fire. The relay outputs are to be fused externally by the plant constructor.
2.3 REPAIRS
Repairs are not permitted. Defective devices must be disposed of in compliance with environmental requirements.
WARNING
:
DANGERS ASSOCIATED WITH UNAUTHORIZED OPENING OF THE DEVICE
Unauthorized opening of the device might place the user in danger or result in substantial damage to property.
CAUTION
:
INVALIDATION OF THE MANUFACTURER
’
S WARRANTY DUE TO
UNAUTHORIZED ALTERATIONS TO THE DEVICE
Alterations to the devices are not permitted. Failure to observe this requirement shall constitute a revocation of the
manufacturer
’
s warranty.
