INSTALLATION AND C ONFIGURATION MANUAL
HXT150
24
#Dn_H-scaleB
The horizontal scaling of the TV picture of channel B in down
converter mode is set using
#Dn_H-scaleB
.
#Dn_H-scaleB
can be set within the range of 50% to 200% of the input signal (only
used when
#Dn_ArcA
is set to
variable
). Default value is 100.
#Dn_V-scaleB
Sets the vertical scaling of the TV picture of channel B in down
converter mode. Can be set within the range of 50% to 200% of the
input signal (only used when
#Dn_ArcB
is set to
variable
).
Default value is 100%.
#Dn_H-EnhB
With this item you can set the horizontal picture enhancement of
channel B in down converter mode between 0 and 100%. By default
set to 0%.
#Dn_ColorConvB
ColorConvB
optimizes the color conversion of channel B in down
converter mode. As the color coding of HD (709) and SD (601) are
different, it is necessary to convert these when Channel B is up-
converting. The best result is generated when the up-converter is
active and the
709to601
setting is selected. It is also possible to
switch the filter
off
. The default setting is
Off.
CROSS-CONV
Cr_CtrlA
With this item you select how the presets for Channel A are
controlled in cross converter mode: Manually (
manual
), via GPI-
triggers (
GPI
,
GPI-A
,
GPI-B
or
GPI-C
), the SD aspect ratio
(
SD-AR
) or via changes of the HD Aspect Ratio (
S2016
). By
default it is set to
Manual
.
Cr_Prst_actA
With this item you can manually change the currently active preset
of channel A in cross converter mode. Can be any preset between 1
and 16. By default it is set to 1. All menu settings that are preceded
with a ‘
#Cr
‘-prefix are part of the preset.
Cr_Prst_editA
Here you can select which of the 16 selectable presets you want to
edit for Channel A in cross converter mode. Changing this will not
change the active preset, unless the currently active preset is the
same you are going to edit. All menu settings that are preceded with
a ‘
#Cr
‘-prefix are part of the preset.