INSTALLATION AND C ONFIGURATION MANUAL
HXT150
14
5 Settings Menu
Introduction
The settings menu displays the current state of each HXT150 setting
and allows you to change or adjust it. Settings can be changed using
the front panel of the Synapse frame (SFR18, SFR08 or SFR04) or
with Cortex. Also the SCP08 control can be used. Please refer to
chapter 3 for information on the Synapse front panel control and
Cortex.
Note:
All items preceded with a #-sign are part of the presets.
SYSTEM SETTINGS
IO-Ctrl
This card has separate presets for the input and output settings under
the ‘
SYSTEM SETTINGS
’ header. With this item you select how
the IO presets are controlled: Manually (
manual
) or via GPI-
triggers (
GPI
,
GPI-A
,
GPI-B
or
GPI-C
). By default it is set to
Manual
.
IO_Prst_Act
With this item you can manually change the currently active IO
settings. Can be any preset between 1 and 8. By default it is set to 1.
All menu settings that are preceded with a ‘
#
‘-prefix under the
‘
SYSTEM SETTINGS
’ header are part of the preset.
IO_Prst_Edit
Here you can select which of the 8 selectable IO settings presets you
want to edit. Changing this will not change the active preset, unless
the currently active preset is the same you are going to edit. All
menu settings that are preceded with a ‘
#
‘-prefix under the
‘
SYSTEM SETTINGS
’ header are part of the preset.
#Inp_Sel
With this item you can select which input you want to use. Can be
SDI-1
(SDI input 1) or
SDI-2
(SDI input 2). You can also choose
a
Zoneplate
or
Colorbar
as input. Set to auto will
automatically detect which SDI input holds a valid input. If both
inputs have a correct input, SDI-1 will be chosen. The default for
this setting is
SDI-1
.
