INSTALLATION AND CONFIGURATION MANUAL
GXG400 – GXG410
34
6 Status Menu
Introduction
The status menu indicates the current status of each item listed below.
SFP STATUS
SFP1-Vendor
These status item display the name of the vendor of the SFP input/output
module A.
SFP1-Type
These status items display the type name/number of SFP input/output
module A.
SFP1-Temp-Stat
These indicate whether the temperature of SFP input/output module A is
Too_High
,
High
,
OK
,
Low
or
Too_Low
. Can also be
NA
in case
Temperature monitoring is not available or the module is not inserted.
SFP1-Volt-Stat
These indicate whether the voltage usage of SFP input/output module A
is
Too_High
,
High
,
OK
,
Low
or
Too_Low
. Can also be
NA
in case
Voltage monitoring is not available or the module is not inserted.
Port1/2-Enabled
These item indicate whether the corresponding output port on SFP output
module A is
enabled
,
disabled
or
NA
(Not available, when no
input signal is available or an input module is inserted.)
Port1/2-Power
These status items indicate the current transmitter power of the specified
port on SFP output module A between 0mW and 6.55mW. When a
receiver is installed or no SFP module is inserted this value is 0.
Port1/2-Power-
Stat
These indicate whether the output power of the specified port on SFP
output module A is
Too_High
,
High
,
OK
,
Low
or
Too_Low
. Can also
be
NA
in case of an input module or no module is inserted.
Port1/2-Bias
These status items indicate the current laser bias of the specified port on
SFP module A is between 0mA and 300mA. When there is a non fiber
SFP or an input module is inserted, this value will be 0.
Port1/2-Bias-Stat
These indicate whether the laser bias of the specified port on SFP output
module A is
Too_High
,
High
,
OK
,
Low
or
Too_Low
. This can also be
NA
in case laser bias monitoring is not available or no output module is
inserted.