EVS Broadcast Equipment SA
27
#Tr_V-scaleA
Sets the vertical scaling of the TV picture of channel A in Transparent
mode. Can be set within the range of 50% to 200% of the input signal
(only used when
#Up_ArcA
is set to
variable
). Default value is
100%.
#Tr_H-EnhA
With this item you can set the horizontal picture enhancement of
channel A in Transparent mode between 0 and 100%. Default is 0%.
#Tr_V-EnhA
With this item you can set the vertical picture enhancement of channel
A in Transparent mode between 0 and 100%. By default set to 0%.
INSERTER
This card can insert several data values in the VBI of the outputs. With
the following settings you can choose what you want to insert.
Timecode_insA
Enables or disables the encoding or transcoding of Timecode
VITC_Ln_InA
With this setting you can select what line of the input you want to copy
the VITC data from (only when input is SD). Can be any line between
line 7 and line 22. Default is line 19.
VITC_Ln_CtrlA
Here you can choose whether you want to select the line, to where you
want to copy the timecode data to, manually (
manual
) or use the
information in the
ATC_DBB
package to select the lines (ATC_DBB
package contains information about the line duplication as well).
Default is
Manual
.
VITC_Ln_625A
When
VITC_Ln_Ctrl
is set to
Manual
, with this setting you can
select a line between 7 and 22 when the output is SD625. Default is
line 19.
VITC_Ln_525A
When
VITC_Ln_Ctrl
is set to
Manual
, with this setting you can
select a line between 7 and 22 when the output is SD525. Default is
line 10.
VITC_Ln_DupA
When set to
On
, the VITC line is duplicated to the above selected line
+ 2 lines.
ATC_Dem_SelA
ATC source de-embed selection. Previously, the first ATC found in a
field would be transcoded to the output. Now, the user can select
whether to de-embed LTC, VITC or the first ATC found.