INSTALLATION AND CONFIGURATION MANUAL
GXG400 – GXG410
32
#Emb1_Gain01 ~
#Emb1_Gain16
(GXG410 only)
Adjusts the gain for the corresponding audio channel between -60 and
12dB. Everything below -999 dB means the audio will be muted.
Default is 0dB
Note: This setting is only available at the GXG410, which has an audio
shuffler option.
#Emb1_Delay01 ~
#Emb1_Delay16
(GXG410 only)
Adjusts the delay of the corresponding audio channel between
-5000ms and 5000ms. Default is 0ms.
Note: This setting is only available at the GXG410, which has an audio
shuffler option.
#Emb1_Phase01/16
(GXG410 only)
Adjusts the audio phase of the corresponding individual audio channel
to 0 deg (‘
0
’) or 180 deg (‘
1
’). Default is
0000000000000000
(channel number is counting up from left to right).
Note: This setting is only available at the GXG410, which has an audio
shuffler option.
AUDIO PROC AMP
Audio-PhaseA
If this setting is set to
Align
, the card ensures audio-phase alignment
between multiple audio channels and audio groups, which is necessary
for multi-channel (surround) purposes. If errors in the signal-chain
occur the de-embedder blocks reset synchronously to maintain audio-
phase-alignment.
If this setting is set to
Off
, the card does not ensure audio-phase
alignment and
eats
-
all
audio including errors. Even if there are
DBN/ANC/ECC or channel-sequence errors, the de-embedder will
pass them. Default is
Align
.
Note:
This setting can be helpful to solve problems in the field using
equipment which doesn’t follow the standards correctly.
GPI-CTRL
This function isn’t currently not accessible but will be enabled in a
software release in the future.