EVS Broadcast Equipment SA
25
Cr_Prst_editA
Here you can select which of the 16 selectable presets you want to edit
for Channel A in cross converter mode. Changing this will not change
the active preset, unless the currently active preset is the same you are
going to edit. All menu settings that are preceded with a ‘
#Cr
‘-prefix
are part of the preset.
#Cr_ArcA
With this item you set the Aspect Ratio of the output of channel A in
cross converter mode. Can be
Anamorphic
,
V-Zoom
,
CenterCut
,
LBox-16:9
,
LBox-14:9
,
PBox-4:3
or
Variable
(custom set
AR, set by H-scale and V-scale settings). The following table shows
the possible aspect ratios.
Setting:
Result:
Anamorphic
With 16:9 source
on 4:3 screens
V-Zoom
With 4:3 source on
16:9 screens
CenterCut
With 16:9 source
on 4:3 screens
LBox-16:9
With 16:9 source
on 4:3 screens
LBox-14:9
With 16:9 source
on 4:3 screens
PBox-4:3
With 4:3 source on
16:9 screens
Variable
Dependant on
Cr_H-scale
and
Cr_V-scale
settings.
#Cr_H-scaleA
The horizontal scaling of the TV picture of channel A in cross
converter mode is set using
#Cr_H-scaleA
.
#Cr_H-scaleA
can
be set within the range of 67% to 133% of the input signal (only used
when
#Cr_ArcA
is set to
variable
). Default value is 100%.
#Cr_V-scaleA
Sets the vertical scaling of the TV picture of channel A in cross
converter mode. Can be set within the range of 67% to 133% of the
input signal (only used when
#Up_ArcA
is set to
variable
).
Default value is 100%.