Security settings
SIM1/SIM2 security setup
SIM1/SIM2 lock: this function can prevent others from using your SIM card without your permission. After the SIM
card PIN code is activated, correct PIN code must be input every time when the mobile phone is powered on;
otherwise you can only make emergency call.
Note: PIN code is the operating password and relative with the SIM card. The SIM card will be locked, if the PIN code
is wrong for 3 consecutive times. At this time, you need the PUK code to unlock the SIM card. The PUK code may be
provided for you together with the PIN code and the SIM card. If not, please contact your network provider.
Fixed dial: after the function is activated, the mobile phone is only allowed to be used to dial the telephone
numbers existing in the list. To turn on the function, you need to input your PIN2 code. Please consult your network
service provider for specific situations.
Note: When the Fixed dial function is active, the function of SIM card will be restricted, such as dial call, send SMS,
and send MMS and so on.
Barred dial: this function needs to be supported by SIM card. Please consult your network service provider for
specific situations.
Change password: you can change the password of SIM1/SIM2 PIN and SIM1/SIM2 PIN2 through the system prompts.
Phone lock
This function is to lock the phone and prevent other people from using the mobile phone without permission (default
password is 0000). After enable the phone lock, you must input the correct password every time powering on the
mobile phone, unless the mobile phone cannot be used normally.
Auto keypad lock
After this function is activated, when the phone is in standby status and without any operation, the keypad will be
locked automatically after the set time. Then the standby screen will show keypad locked icon. At the left bottom
corner of the screen, word of Unlock will appear. If you need to unlock the mobile phone, you can press any key, and
then operate according to relevant interface prompts.
Change password
You can change the phone lock through the system prompts.
Restore factory settings
Enter into the restore factory settings, the mobile phone will prompt you to input password (default password is
0000). You can carry on corresponding operation after inputting the correct password.
After running the Restore factory settings, the environment setup (e.g. user profile) restore to factory default
setting.
Troubleshooting
List of EVOLVE service points for the warranty and service can be found at
www.evolve-europe.com
Your phone package that you send for repair should include: cell phone wrapped well against transport damage
(bubble wrap) - valid warranty card or invoice containing the device IMEI - description of the defect – your contact
details (address, phone, email).
ABACUS Electric s.r.o Czech Republic reserves the right at any time without prior notice to revise this document or
withdraw it and shall have no liability if the device is used for purposes other than the amount recommended.
0678
DECLARATION OF CONFORMITY:
ABACUS Electric s.r.o Czech Republic hereby declares that the model EVOLVE Raptor meets standards and
regulations relevant to the type of equipment. The complete text of the declaration of conformity is available on
Settings, manuals and other information relating to products check at www.evolve-europe.com.
Copyright © 2011 ABACUS Electric s.r.o Czech Republic. All rights reserved.
The appearance and specifications are subject to change without notice.
Subject to mistakes.
