Evolution Rage3-B, Original Instructions Manual, Page: 27 / 152

27
www.evolutionpowertools.com
EN
DE
FR
IT
NL
(8.10) SUPPORTNG LONG WORKPIECES
The free end of a long workpiece should be supported at the
same height as the machine table. The operator should consider
using a remote workpiece support if thought necessary.
(8.11) INSTALLING or REMOVING a BLADE
WARNING:
Only carry out this operation with the machine
disconnected from the mains supply.
WARNING:
Only use genuine Evolution blades which are
designed for this machine. Ensure that the maximum speed
of the blade is higher than the speed of the motor.
Note: It is recommended that the operator considers wearing
protective gloves when handling the blade during installation
or when changing the blade.
• Ensure the Cutting Head is in its upper position.
• Remove the lower guard operating arm from the machine
by removing the pivot screw.
(Fig. 24)
Store this screw
safely for future use.
• Press the lower blade guard locking lever (a) and rotate the lower
blade guard (b) up and into the upper blade guard.
(Fig. 25)
• Press the black arbor lock button to lock the arbor. (Fig. 26)
Fig. 24
Fig. 25
Fig. 26