Evolution FURY62102, Original Instructions Manual

Page: 11 / 132

11
www.evolutionpowertools.com
EN
DE
FR
TR
(2.6) 5) General Power Tool
Safety Warnings [Service]
a) Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the
power tool is maintained.
(2.7) HEALTH ADVICE
WARNING:
When using this machine, dust
particles may be produced. In some instances,
depending on the materials you are working
with, this dust can be particularly harmful.
If you suspect that paint on the surface of
material you wish to cut contains lead, seek
professional advice. Lead based paints should
only be removed by a professional and you
should not attempt to remove it yourself.
Once the dust has been deposited on surfaces,
hand to mouth contact can result in the
ingestion of lead.
Exposure to even low levels of lead can
cause irreversible brain and nervous system
damage. The young and unborn children are
particularly vulnerable. You are advised to
consider the risks associated with the materials
you are working with and to reduce the risk
of exposure. As some materials can produce
dust that may be hazardous to your health,
we recommend the use of an approved face
mask with replaceable filters when using
this machine.
You should always:
• Work in a well-ventilated area.
• Work with approved safety equipment,
such as dust masks that are specially
designed to filter microscopic particles.
(2.8) WARNING: the operation of any power
tool can result in foreign objects being thrown
towards your eyes, which could result in severe
eye damage. Before beginning power tool
operation, always wear safety goggles
or safety glasses with side shield or a full
face shield where necessary.
(3.5) ADDITIONAL SAFETY
INSTRUCTIONS - MITRE SAWS
The following specific safety instructions
for Mitre Saws are based on the requirements
of EN61029-2-9:2009.
BLADE SAFETY
WARNING:
Rotating Circular Saw Blades are
extremely dangerous and can cause serious
injury and amputation. Always keep fingers
and hands at least 150mm away from the
blade at all times. Never attempt to retrieve
sawn material until the cutting head is in the
raised position, the guard is fully closed and
the saw blade has stopped rotating.
Only use saw blades that are recommended
by the manufacturer and as detailed in
this manual and that comply with the
requirements of EN 847-1.
Do Not use saw blades that are damaged or
deformed as they could shatter and cause
serious injury to the operator or bystanders.
Do Not use saw blades that are manufactured
from high speed steel (HSS).
If the table insert becomes damaged or
worn it must be replaced with an identical
one available from the manufacturer
as detailed in this manual.