www.evolutionpowertools.com
8
SPECIFICATION
EVOLUTION BATTERY
JIGSAW & CHARGER
JIGSAW
Voltage: 18V-DC
No Load Speed: 0-2400 strokes per minute
Stroke Length:
25.4mm
Blade Type:
T-shank
CHARGER
Rated Voltage:
230-240VAC
Rated Frequency:
50/60Hz
Rate Input Power:
55W
Rated Output Voltage:
18VDC
Rated Output Current:
1.7A
Protection Class:
11
Degree Of Protection:
Ordinary
Charging Time:
1 Hour
BATTERY PACK
Battery Amps:
1.5A
Battery Watts/Hour:
27 Wh
Battery Voltage:
18V-DC
Battery Capacity:
1500 mAh Li-ion rechargable
NOISE AND VIBRATION DATA
Sound Pressure:
87.3dB(A) K=3dB
Sound Power:
98.3dB(A) K=3dB
Vibration:
5.383m/s
2
K 1.5 m/s
2
The declared vibration total value has been
measured in accordance with a standard test
method and may be used for comparing one
tool with another.
The declared vibration total value may also
be used in a preliminary assessment of
exposure.
WARNING:
The vibration emission during
actual use of the power tool can differ from the
declared total value depending on the ways in
which the tool is used. The need to identify
safety measures and to protect the operator
are based on an estimation of exposure in the
actual conditions of use (taking account of all
parts of the operating cycle, such as the times
the tool is switched off, when it is running idle,
in addition to trigger time)
ITEMS SUPPLIED
Instruction Manual: 1pc
Hex Key: 1pc
Jigsaw Blades: 3pcs
18V Battery Pack: 1pc
18V Battery Charger: 1pc
FUNCTIONAL DESCRIPTION
Note:
Before using this tool, read the
Instruction manual carefully.
BEFORE USE
A Battery Pack must be inserted into the
tool as described below. It is important that
the battery pack is of the designated type
recommended for this machine. Newly
purchased Battery Packs do not come fully
charged, and should be charged before use.
Note:
Battery power and performance will
improve after several discharge/charging
cycles have been completed.
WARNING:
The battery pack and battery
charger are specially designed to work
together. Do not attempt to use any other
type of charger or battery pack with this
Jigsaw.
1. CHARGING A BATTERY PACK (Fig. 1)
• Position the charger on a work bench
or similar in a well ventilated location and
ensure that the charger cannot be covered
by workshop cloths etc.
• Plug the charger into a suitable power
socket. The green LED will illuminate.
• Slide the Evolution 18V battery pack into the
docking port of the charger. It will only fit in
one way round.