www.evolutionpowertools.com
18v Li-ion BATTERY JigsAw
11
5. TRIGGER SWITCH SAFETY LOCK
(Fig. 4b)
The Trigger Switch can only be operated once
the safety lock has been disengaged.
• To disengage the safety lock press the
safety lock slide button on either the Right
Hand or Left Hand side of the handle.
• Press the trigger switch to start the
machine.
Note:
The Safety Lock will automatically
reset to the ‘Safe’ position when the
trigger switch is released and the machine
has stopped
6. LASER CUTTING GUIDE
This jigsaw is fitted with a Laser Guide
which can be particularly useful when cutting
straight lines.
Only switch the Laser Guide on when you
are about to make a straight cut, and switch
it off when the cut has been completed. The
switch is located on the front of the machine.
Press the button once to switch the Laser
Guide ‘On’. Press once more to switch the
Laser Guide ‘Off’.
(Fig. 5)
WARNING:
Do not look directly into the
laser beam, or point it at another person, or
at pets or other animals. Do not use the Laser
Guide if the material to be cut is reflective.
Any repairs to the laser must be entrusted
to Evolution Power Tools or their appointed
agent. The laser module must not be replaced
with a laser of a different type.
7. CUTTING ACTION SELECTION SWITCH
(Fig. 6)
This jigsaw has a 4 position switch (0-3)
located on the Left Hand side of the machine
just behind the blade. Only operate this
switch when the machine is switched ‘Off’
and the blade is stationary.
Position ‘0’
Straight cutting action
Positions ‘1 – 3’
Orbital cutting actions
Orbital cutting action has an aggressive blade
cutting motion and is especially suited for
cutting soft materials. During orbital cutting
the blade moves forwards as well as up and
FIG: 4
FIG: 5
FIG: 6
B
A