www.evolutionpowertools.com
18v Li-ion BATTERY JigsAw
5
5. Recharge the battery only with the
charger specified by the manufacturer.
A
charger that is suitable for one type of battery
pack may create a risk of fire when used with
another battery pack.
6. Use this power tool only with specially
designated battery packs.
Use of any other
battery packs may create a risk of injury and
fire.
7. When the battery pack is not in use,
keep it away from other metal objects like
paper clips, coins, keys, nails, screws or
other small metal objects that can make a
connection from one terminal to another.
Shorting the battery terminals together may
cause burns or a fire.
8. Under extreme conditions electrolyte
may be leak from the battery. If contact
accidentally occurs, flush your skin with
water. If electrolyte contacts your eyes,
additionally seek medical help.
Electrolyte
from the battery may cause irritation or burns.
9. Hold the tool by the insulated gripping
surfaces, especially when performing an
operation where the blade may contact
hidden wiring
. If the blade contacts a ‘live’
wire, exposed metal parts of the power tool
could become ‘live’ and give the operator an
electric shock.
10. If possible, use clamps or a vice to hold
your work.
11. When cutting into walls, floors or
similar areas, make sure, as far as possible,
that there are no services (gas or water
pipes, electric cables etc) in the path of the
blade.
Striking hidden services could cause
injury to the user and damage to the property.
12. Always disconnect the jigsaw battery
before changing the blade.
Never use
damaged or distorted blades.
13. Always allow the saw to come to a
complete halt before putting it down.
A
running tool may bounce uncontrollably if the
blade tip contacts any surface.
14. Always consider the work environment
and wear the appropriate personal
protection equipment.
This could include dust
masks, eye protection, safety footwear etc.
SAFETY RULES FOR YOU
EVOLUTION BATTERY CHARGER
WARNING:
READ AND UNDERSTAND
ALL OF THESE INSTRUCTIONS. SAVE
THESE INSTRUCTIONS FOR FUTURE
OPERATOR USE.
1. Do not use the charger outdoors or
expose to wet or damp conditions.
Water
entering the charger will increase the risk of
electric shock.
2. Use this charger only with the
designated rechargeable battery packs.
Other types of battery may overheat and
burst causing personal injury or damage.
3. Do not abuse the charger cord.
Never use
the cord to carry the charger. Do not pull the
cord rather than the plug when disconnecting
from the power supply. Replace damaged
cords immediately.
4. Ensure that the power cord is routed so
that it does not pose a trip hazard.
Also
ensure that it cannot come into contact with
sharp edges or moving parts which could
cause damage to the cord.
5. Do not use any attachment not
recommended or sold by the battery
charger manufacturer.
Use of unauthorised
attachments or battery packs could lead
to a significant risk of electric shock, fire or
personal injury.
6. Keep the power cord and the charger
body from heat sources.
Heat can damage
the charger body and/or internal parts.
7. Do not use this charger if the cord or plug
is damaged.
A damaged cord or plug must be
replaced before the charger can be used.
8. Do not use the charger if it has been
dropped, received a sharp blow or in
any other way has been damaged.
Have
the charger checked at an authorized
service centre.
9. Do not disassemble charger.
Take to an
authorized service centre when service or
repair is required.
10. Unplug the charger from the
mains power supply when attempting
maintenance or cleaning.
This will reduce
the risk of electric shock.