www.modellmarkt24.ch
www.modellmarkt24.ch
3
EN
•
Always use the throttle linkage to close the carburetor fully or turn off the ignition power
switch to stop the engine.
•
Never use hands, fingers, or any other body part to stop the propeller.
•
Never throw any object into a propeller to stop it.
•
Never run the engine in the vicinity of loose small objects, such as gravel or sand, to avoid
the propeller uncontrollably throwing such materials.
•
Never wear loose clothing or a loose neckstrap when operating your model engine as these
items could become entangled in the propeller.
•
Never have loose objects such as screwdrivers, pencils, etc. in your pockets when operating
your model engine. These could fall into the propeller.
•
Never allow fuel to come into contact with eyes or mouth. Gasoline and other fuels used
in model engines are poisonous.
•
Always ensure gasoline and fuel are stored in a clearly marked container away from
the reach of children.
Precautionary Guidelines
•
Always mount the engine securely on a bench mount or high-quality engine mount.
•
Always use the correct size and pitch of propeller for your engine. Refer to the Propeller Chart
in this manual.
•
Always confirm proper balance of your propeller prior to installation of the engine. Failure
to do so could result in damage to the engine and/or airframe.
•
Always utilize an electric starter to start your engine.
•
Always discard any propeller that is nicked, scratched, cracked or damaged in any way.
•
Always run your model engine in a well-ventilated area. Model engines can produce possibly
harmful carbon monoxide fumes.
•
Always store fuel in a cool, dry location. Do not allow fuel containers to come in direct
contact with concrete, as the fuel may absorb moisture.
•
Always responsibly discard fuel if there is condensation and/or water inside the fuel
container.
•
Never return unused fuel from the fuel tank back into the fuel container.
•
Never attempt to repair or modify a propeller beyond its intended use.
•
Never handle model engines, mufflers and/or tuned pipes until they have had time to cool.
They can become extremely hot when in use.
