Evolution Technologies MK-416C, User Manual

Page: 8 / 29

Evolution MK-425C/449C/461C Advanced User Guide
22
B2-The Buttons:
MIDI CC Description Program
(Press Twice)
Data Lsb
(Press Twice)
Data Msb
(Press Twice)
0-119 Standard MIDI CC’s - Toggle Value 2 Toggle Value 1
120-127 Channel Mode
Messages
- Toggle Value 2 Toggle Value 1
128 Pitch Bend Range - Sensitivity value -
129 Channel Fine Tune - Tuning amount -
130 Channel Coarse Tune - Tuning amount -
131 Channel Pressure - Pressure amount -
132 RPN Coarse Value RPN LSB RPN MSB
133 RPN Fine Value RPN LSB RPN MSB
134 NRPN Coarse Value NRPN LSB NRPN MSB
135 NRPN Fine Value NRPN LSB NRPN MSB
136 Master Volume GM* - Volume LSB Volume MSB
137 Master Pan GM* - Pan LSB Pan MSB
138 Master Coarse Tune
GM* - Tuning LSB Tuning MSB
139 Master Fine Tune
GM* - Tuning LSB Tuning MSB
140 Chorus Mod rate
GM2* - Mod rate -
141 Chorus Mod Depth
GM2* - Mod depth -
142 Feedback GM2* - Feedback level -
143 Send to Reverb GM2* - Reverb send
level -
144 Pitch Bend - Pitch shift LSB Pitch shift MSB
145 Program/Bank Preset Program Bank LSB Bank MSB
146 MIDI CC (on/off) MIDI CC Button press
value Button release
value
147 Note (on/off) Note Velocity off Velocity on
148 Note (on/off toggle) Note Velocity off Velocity on
149
MMC Command** - Command select. -
150
Reverb type GM2 * - Type -
151
Reverb time GM2 * - Time -
152
Chorus type GM2* - Type -
255
Controller Off***
- - -
* Sysex messages - for details please see pages 12 & 13.
** MMC Sysex messages, for details please see page 7.
*** This value cannot be typed in using the numerical keypad. Type in 144 and
then press the + button to set this value.
7
Evolution MK-425C/449C/461C Advanced User Guide
As already described, the standard MIDI controller numbers range from 0 to 131. We
have extended the list of MIDI cc’s that can be assigned to the controllers of the
keyboard to include RPN/NRPN, MMC and General MIDI 1&2 SysEx messages.
These advanced messages are as easy to program as a regular MIDI cc instruction by
entering values 132 to 152 when programming MIDI cc’s. The charts on page 8 and 9
(or Appendix B) show you what number correspond to each message
To program the values required for these advanced messages, the
MK-425C/449C/461C requires you to press the PROGRAM, DATA LSB and DATA
MSB buttons twice respectively. Pressing only once will send the program and bank
change instructions “on the fly” as described in the Getting Started guide.
Lets look at a couple of examples to see how this works. Please refer to the charts on
pages 4 & 5 so you get to grips with the principle:
1. Select the button you want to control the MMC message.
2. Press “CONTROL ASSIGN” on the MK-425C/449C/461C.
3. Type in “149” using the numerical keypad.
This is the number that correspond to the MMC instruction, as per the chart on
page 4 and 5.
4. Press “CHANNEL” once.
5. Type in “127”, using the numerical keypad.
This ensures that the message is set to all device ID numbers. For more
information about this, please read “About SysEx Messages & Device ID”
on page 9.
4. Press the “DATA LSB” button twice.
5. Enter a number from the chart on the next page to select the MMC
message you want:
RPN/NRPN, GM 1+2 SysEx & Other Messages
Assigning MMC Control To A Button
Number MMC Command
01 STOP
02 PLAY
03 DEFERRED PLAY
04 FAST FORWARD
05 REWIND
06 RECORD STROBE
07 RECORD EXIT
08 RECORD PAUSE
09 PAUSE
10 EJECT
11 CHASE
12 COMMAND ERROR RESET
13 MMC RESET