CONNECTING THE AIR LINE TO THE EAZY
AND BIO-CHAMBER ON THE NEXUS
1. CONNECTING PRE-FITTED AIR LINE TO THE EAZY
The piece of airline pre-connected to the Air Control Valve port labelled “Air to Eazy” needs to
be inserted into the Air Valve on the centre chamber wall of the Nexus. This then connects to
the air line that wraps around the Eazy and connect up to the 90
°
elbow located at the bottom
of the Eazy in the centre chamber. Please ensure this airline is fed between the actuator and
the stainless steel cover on the Inlet Valve Assembly.
2. CONNECTING AIR LINE TO THE BIO-CHAMBER
The piece of air line supplied in the box (Item 7) should be connected to the Air Control Valve
port labelled “Air to Bio-Chamber”. This needs to be fed through the hole in the Nexus inlet and
connected up to the Air Valve fitted to the outer chamber wall of the Nexus.
3. CONNECTING AIR LINE TO THE AIR PUMP
Take the existing length of air line you removed earlier (see page 8) that was connected between
the T-Piece valve on your Nexus and your Air Pump. Now connect this air line into Air Control
Valve box in the port labelled “Air Pump”. (You do not need the old T-Piece and small lengths of
air line you removed earlier on page 8.
16
