K1 MEDIA INSTALLATION
Now that you have your EazyPod Complete installed, you will need to add the 30
litres of K1 Media that was supplied with the EazyPod Complete. Simply empty the
entire bag into the inner chamber
(C)
.
CONNECTION TO THE ELECTRICITY SUPPLY
Electrical installations must be done by a qualified electrician.
The power supply must meet the specifications on the product.
The cores in the supply cable are coloured in accordance with the
following code:
Brown = Live. Blue = Neutral. Earth = Green/Yellow.
Do not use the cable to lift the EazyPod Complete as this may cause damage.
WARNING
- A Residual Current Device (RCD), also known as the
Residual Current Circuit Breaker (RCCB), with a tripping current not
exceeding 30mA must be installed in the supply circuit. A means
of disconnection from the supply having a contact separation of at
least 3mm in all poles must be incorporated in the wiring.
Caution:
Use in the area of the garden pond only if the installation complies with
the relevant wiring regulations. Please consult a qualified electrician.
Caution:
Always disconnect all pond appliances from the mains supply before
putting your hands into the water.
All electrical installations and wiring must be adequately protected to prevent
any damage.
Enough electrical cable is supplied with the UV to connect to the mains electric.
This unit must be connected to permanent wiring. A switch with 3mm contact
separation must be provided in the fixed wiring to provide disconnection from the
electricity supply.
12
