AIR PUMP INSTALLATION
Now that you have your EazyPod Complete installed, you will need to connect your
air pump to the EazyPod Complete for the cleaning cycle. This will agitate the K1
media so that the waste which has collected in the media can be removed from the
system. We recommend an EA AirPump 70.
The air pump is connected to the air ring inlet using a garden hose or braided
pipe (10 mm inner diameter). The air ring inlet is positioned on the outside of the
EazyPod Complete. It is recommended that the air pump is positioned higher than
the water level in the EazyPod Complete to prevent water flowing back into the air
pump when it is switched off. However, the air valve should be in the off position,
and the air pump switched off or in use elsewhere when not in the cleaning mode.
Air Valve Off
Air Valve On
11
