22
PRiMAcy 2
USiNG THE cONTROL PANELS
LED control panel
OFF
STEADy LiGHT
FLASHiNG
PRINTER READY
• The printer is ready
to receive data.
PROCESSING
• The printer is receiving
data.
RIBBON
• No ribbon in the printer.
• End of ribbon.
•
The ribbon is not correctly fitted.
• The ribbon is torn.
• The ribbon is not recognised.
Check the condition of the ribbon in the printer. If you have a
print job in progress, this restarts with a new card.
CARDS
• No cards in the card feeder.
Put cards back into the feeder – the process starts again.
• card loading error.
Check cards have been loaded. For any other problems
contact your Evolis dealer.
PRINTER COVER OPEN
• The printer cover is open.
Close the cover again. The printer starts up.
MECHANICAL ERROR
• card jammed in the printer.
• Mechanical component fault.
Open the cover and hold down the power button in
order to eject the jammed card.
If the problem persists, contact your Evolis dealer for
assistance.
