DUPLIPASS
8
Before attempting any maintenance, always ensure that the power cable is unplugged. For your personal safety, ensure that
the cable and power supply unit remain easy to access, especially in the event of an emergency.
INSTALLATION
Connecting the printer
Connection to the power supply
∙
Connect the power cable to the power supply unit, then plug the power supply unit connector into
the printer.
∙
Next, plug the end of the power cable into an earthed power socket.
∙
The printer is powered on: the control panel lights up showing the printer is working properly. If
the control panel does not lightup, then either installation has not been carried out correctly or the
printer is not working properly. Check the installation.
The printer must be connected to a properly protected and earthed electrical installation.
FI: Laite on liitettävä suojamaadoitus koskettimilla varustettuun pistorasiaan.
NO: Apparatet må tilkoples jordet stikkontakt.
SE: Apparaten skall anslutas till jordat uttag.
DK: Printeren skal tilsluttes til en korrekt beskyttet og jordforbundet el-installtion.
It is recommended to unplug the power cable of your printer at least once a week.
Connecting the USB cable
This cable enables the printer to offer a Bluetooth network.
Plug the USB cable on the two ports (A and B), as indicated on the picture: