DUPLIPASS
5
You will be asked for the full original packaging (outer box, inner wedges and protective bags) in the event that the printer is
returned. If the printer is returned without its original packaging and components are damaged in transit, these components will
no longer be covered by the warranty. You will be charged for new packaging for shipping the printer back to you.
If any of these components are missing, please contact your Evolis dealer.
Use only the power supply unit supplied with your Evolis printer: CWT type KPL-065M-VI or FSP type FSP060-RAAK3
Use only the USB cable supplied with your Evolis printer.
The Evolis printer must be placed in a dry location, protected from dust and drafts but well-ventilated. Take care to keep your printer
on a flat, sturdy surface able to bear its weight.
1 - GETTING STARTED
UNPACKING
Your printer is supplied with several accessories that we ask you to look at closely.
This list may vary depending on your location.
The printer is shipped in special packaging designed to prevent any damage in transit. If you notice any visible damage, do not hesitate to contact
the shipper and immediately inform your Evolis dealer, who will tell you the procedure to follow.
Evolis takes great care over the quality of its packaging and we ask that you keep this packaging somewhere clean and dry.
Accessories supplied with your printer:
∙
Power supply unit – CWT type KPL-065M-VI or FSP type FSP060-RAAK3
∙
Mains power cable.
∙
USB cable.
!
!
NOTE