Software Introduction
· 32 ·
PPC-1781
The effect of GPIO is shown in the above picture.
Using method: GPIO is disabled by default, to avoid conflict when GPIO setup also
exists in user program. GPIO supports up to 64Pin display. When it is above 8Pin on
the interface, it is shown in the form of rolling bar. GPIO input/output mode can be set
up in the corresponding single-option checkbox. High/low status of electrical level is
indicated by green LED: On means high level; Off means low level. When GPIO is
output mode, the electrical level status can be switched by pressing corresponding
“Setup” button on the right. If it is a network model motherboard, the specific LED of
the motherboard will be indicated, and can be set up.
Function: Setup of GPIO and network LED
