EVOC PPC-1781 Series User Manual Download Page 88

Page: 88 / 117

PC Maintenance

· 80 ·

PPC-1781

Caution

A risk of damage exists!

Always use same type of Li-ion battery or that recommended by the

manufacturer for replacement.

Disposal

Caution

The discarded battery should be disposed according to local laws and regulations.

Work Preparation

Note:

1. Keep down the current settings of BIOS Setup or save the settings in the user

configuration file in the BIOS Setup “Exit” menu;

2. A list is provided in the BIOS manual, and information can be stored there;

3. Disconnect the PC from the power supply.

9.2 Installing the Drivers

Regarding the installation of the driver program and the detailed information of the

motherboard, please refer to the enclosed CD of the PC.

Summary of Contents for PPC-1781 Series






















































































































Search results

Summary of Contents for PPC-1781 Series

Reviews:

Related manuals for PPC-1781 Series

Brands by name

Popular brands

EVOC PPC-1781 Series, User Manual

Search results

Summary of Contents for PPC-1781 Series

Reviews:

Related manuals for PPC-1781 Series

Brands by name

Popular brands