background image

 

Legal Information 

Warnings 

Please pay attention to the tips within the manual so as to avoid personal injury or 

property losses. The tips for personal injury are indicated in warning triangles while 

the tips only related to property losses have no warning triangles. The warning tips are 

listed as follows with the hazardous scale from severe to slight. 

 Danger

 

If handled carelessly, death or severe human injury will occur. 

 Warning

 

If handled carelessly, death or severe human injury might occur. 

 Caution 

 

Warning triangle indicates that slight human injury might occur if handled carelessly.

Note

 

Unexpected result or status might occur, if not handled according to the tips. 

Professional Personnel   

The product/system covered by the manual can only be handled by qualified and 

professional personnel. During operation, please follow the respective instructive 

manuals, especially the safety warnings. The professional personnel have been trained 

and possess relevant experiences; therefore, he/she could be aware of the risks of the 

product/system and avoid possible damages.   

EVOC Product 

Please pay attention to the following instructions:   

 Warning

 

EVOC product can only be used according to the descriptions within the manual, 
including the contents and the relevant technical documents. If the products or 
components from other companies are required, please get the recommendation and 
grant from EVOC first. Proper transportation, storage, assembly, installation, 
debugging, operation and maintenance are prerequisite to ensure product safety and 
normal operation; therefore, please ensure permitted environment conditions and pay 
attention to the tips within the manual.   

 

Summary of Contents for NPC-8210
















































Reviews: