Operating Instructions
- 22 -
NPC-8210
4.8 Using System Setup Program and UEFI Boot Manager
During bootup, the following keys can be used to realize system functions.
Table 1 Function Key During Bootup
Function key
Description
<DEL>
Enter into system setup program.
During serial port redirection, use “<ESC>-” to replace <DEL> to
enter into system setup program.
<F2>
Enter into system setup program.
During serial port redirection, use “<ESC>2” to replace <DEL> to
enter into system setup program.
<F7>
Enter into BIOS load manager, and select load device.
During serial port redirection, use “<ESC>7” to replace <DEL> to
enter into system setup program.
<Ctrl>+<S>
Configure NIC setting for PXE boot (if it has been enabled, please
refer to “Using System Setup Program”
）
, which is only applicable to
NPC-8210 complete PC.
System setup boot program is a BIOS program, an option which enables you to
manage system hardware and designated BIOS class. By system setup program, you
can:
Modify NVRAM settings after adding or deleting hardware.
Check system hardware configuraiton
Enable or disable integrated devices.
Set up performance and power management threshold value.
Manage system security.
Select System Boot Mode
By system setup program, you can designate boot mode to facilitate installation of
operating system.
