REMOVING REAR WHEEL
Pull up red LOCK pin and pull out the rear wheel.
NOTE: Removal of towing rods and front wheels and flag is the opposite of the
installation step.
DISASSEMBLY , FOLDING AND STORAGE
For partial or complete disassembly, folding and storage, reverse the above-mentioned process and be
sure to insert the safety pins fully and lock it with the spring clips. Inspect the trailer and its parts before
and after each use and storage. Check the working conditions of both trailer and bike before each use.
Store trailer in a dry area under ambient conditions and always make sure trailer is dry before storing.
CAUTION
To prevent color fading and eventual weakening of the fabrics or components, store
the trailer out of direct sunlight.
MAINTENANCE
From time to time, check your trailer for loose hardware, worn parts, torn material or stitching. Repair
or replace parts as needed. Over or under inflation of tires may cause handling issues for the trailer.
Replace tires only with street tread and not with BMX or knobby tread.
We suggest to periodically clean all parts wipe dry and then let air dry, especially if you are exposed to
salt water, salt spray, beach sand etc.
CAUTION
Do not make any modifications to the trailer/stroller. Be sure that the trailer and
bike are in good working conditions. A bike dealer can help you with inspection and
maintenance.
WARNING
Do not use cleaning solvents. Clean only with mild soap and water.
OPTION
:
Assembly and disassembly of the frame & seat/As jogger
