background image

PRE-RIDE SAFETY CHECK

Check to ensure hitch connector and safety strap are secured.

BUCKLE UP! Check seat harness and secure all baggage.

Check TIRE AIR PRESSURE. Inspect bike and trailer condition before each use.

HELMETS ON! Ensure rider and child helmets are on and secure.

RIDING TIPS

Ride slower than you would if you were without the trailer.

You will require extra stopping distance. Use your brakes early. Take corners very gradually.

Use on smooth roads only. Do not ride over curbs, potholes or off road.

Always use the flag supplied with the trailer to allow others to see you.

SAFETY GUIDELINES

THINK SAFETY FIRST.

Check the working conditions of both bike and trailer before each use. If you

discover broken components, misalignments or missing parts, correct the problem prior to use. Please
refer to all warning and guidelines for the proper use of this trailer. Be aware of what is necessary to
safely control the bike-trailer combination.

PLEASE FOLLOW THESE SAFETY GUIDENLINES

WHEN USING YOUR TRAILER:

Inspect the trailer and its parts before and after each use. Proper care and maintenance of the trailer
are essential to safety.

When assembling the trailer, make sure that the wheels are correctly and securely installed as
described in the assembly instructions. Inflate the tires to the desired pressure and check the pressure
before each use. Over-inflation may cause the trailer to bounce or turn over. Use only tires with street
tread and not with BMX or knobby tread.

Attach the hitch connector securely to the bicycle frame. The connector should be tightened and the
safety strap wrapped around the stay and the hook snapped into the D-ring.

The person riding the towing bicycle should be at least 16 years of age and in good physical
condition.

Be sure that the bicycle used with the trailer is in good working condition and has good brakes. A
bicycle shop can help you with inspection and maintenance. It is recommendable to equip the towing
bicycle with rear-view mirrors. At dusk or dawn, the lights must always be switched on.

Do not overload the trailer. The load limit for cargo and/or passengers is 51.3kg(112lb). Position the
load as low as possible and center it within the trailer (front to rear and left to right). Any extra gear
should be placed towards the rear. All loads should be secured so that it does not shift. IMPORTANT:
Instruct children riding in the trailer not to bounce, rock or lean; such movements may cause the
trailer to lean or flip. The tow-bar must not bear any extra load.

Do not attempt to install other seating systems in the trailer. It is not designed for car seats, stroller
seats, infant beds, or any other type of seating. Use of any seating system other than the original
equipment seat will void the warranty, and may result in damage to the trailer or injury of the
passengers.

Pulling this trailer affects the operation of the bicycle. Stopping, starting and turning are affected,
depending on the weight of the cargo. To familiarize yourself with the changes, load the trailer to

Summary of Contents for BTA42S


















Reviews: