Step 4
:
Attach the Lat Bar Holder (10) to the Top
Frame (9) using two 3/8" x 3" Hex Head
Bolts (65), four 3/8" Washers (75) and
two 3/8" Nylon Nuts (77). Insert two 1"
Bushings (46) and two 1/2" Steel
Bushings (52) into the Top Frame (9) as
shown in FIG 8. Be sure that the 2” x 3”
Rect End Plug (42) is inserted into the
Top Frame (9).
Slide the Top Frame (9) over the two
Guides (5). Align the mounting holes in
the Top Frame (9) with the holes in the
Upright (3) then secure with the 1/2" x
4" Hex Head Bolts (60), four 1/2" Washers
(74) and two 1/2" Nylon Nuts (76).
Attach the Top Frame (9) to the Rear
Upright (4) using two 1/2" x 3" Hex Head
Bolts (62), four 1/2" Washers (74) and
two 1/2" Nylon Nuts (76) as shown in
FIG 9.
assembly instructions
-11-
ASSEMBL
Y
FIG-9
FIG-8
