|
29
en
N-coder
home button
Back button
setting the value of the function
MIG/MAG
- Setting the welding parameters
Welding parameters are set by n-coders.
speed of wire feeding
Welding voltage
setting of voltage
setting speed of wire
MIG/MAG
- JOb MODE
save and recall of user programs (save / recall) - same as description in
method mma above.
MIG/MAG
- Description of working screen
saving program
Welding methode
recall programu
home
back
value of welding
voltage
speed of wire feeding
Customization
choose „settings“ by n-coder and confirm by pressing it.
N-coder
settiNGs
Function
Available options
lenguage
english
units
imperial / metric
Buttons beep
oN / oFF
display brightness
1 - 10
Factory reset
Yes / No
language
units
display brightness
Buttons beep
N-coder
Factory reset
software information
Welding in method TIG
Welding inverters allow tiG welding with touch-triggering. the tiG method
is very effective for welding stainless steel. switch the machine to tiG mode.
1. connect the welding accessories. Welding torch on the pole (-), grounding
cable on the pole (+), connect the protective gas.
2. turn the inverter on by the main switch. set the welding method tiG and
set the welding parameters according to the above procedure.
3. press the button on the burner.
4. release the button on the burner to end the welding process.
Welding process at TIG LA
(picture 1)
starting the gas with a valve on the welding torch.
1. approaching the tungsten electrode to the welded material.
2. light touch of tungsten electrode of welded material (no need to cut).
3. removal of tungsten electrode and arcing of welding arc with la - very low
wear tungsten electrodes by touch.
4. Welding process.
5. Finishing the welding process and activating the doWN slope (crater fi
-
lling) is performed by removing tungsten-electrodes to about 8 - 10 mm
from the welded material.
6. re-approach - Welding current decreases after the set time to the end va
-
lue set current (eg 10 a) - filling the crater.
7. end of the welding process. the digital control automatically switches off
the welding process.
switch off the gas with a valve on the welding torch.
