| 23
en
setting the value of the function
N-coder
Back button
home button
Working screen
N-coder
Back button
home button
MMA
- Welding current setting
the welding current is set using the control n-coder.
Welding current
Welding voltage / no load voltage
N-coder
MMA
- Setting the ANTI STICK function
(detachment of the electrode)
the function reduces the welding voltage to 5 v when evaluating the short-
-circuit at the output terminals (when the electrode is glued to the material
to be welded), thus allowing easy removal of the electrode from the ma
-
terial to be welded. the function is automatically activated each time the
machine is switched on.
MMA
- JOb MODE
the function allows saving of user programs. there are 10 free storage posi
-
tions that can be overwritten at will.
Saving the user program (SAVE)
press the n-coder i for about 4 seconds. then choose any position with n-co
-
der ii a confirm saving by pressing n-coder ii.
N-coder i
N-coder ii
Loading the user program (RECALL)
press the n-coder iii for about 4 seconds. then choose any saved program
with n-coder ii a confirm saving by pressing n-coder ii.
N-coder iii
N-coder ii
MMA
- Description of screen
saving program
Welding method
recall programu
home button
Back button
arc force
value
hot start
value
Metoda
TIG DC LIFT
select the welding method by turning the n-coder and confirm by pressing.
Welding methode
N-coder
