24 | en
after confirming the method selection, a screen appears with the option to
set the selected functions. You can skip the settings by pressing the home
button and go to the work screen, or you can select a function with the N
-
-coder and press to confirm the selection. You can then adjust the value of
the function. to return to the function menu, press the Back button. if you
do not want to edit other functions, press the N-coder to go to the work
screen.
TIG DC LIFT
- Setting the 2-STROKE function
the function indicates how the welding process is activated. When using
this mode, it is necessary to press the torch button during welding, which
sends a signal to activate the welding process. pressing the torch button
starts the welding process and activates the sequence of functions. the
function can be modified when selecting a method (see description above) or
during operation on the work screen. activation on the work screen is done
by pressing the back button. the function is selected by gradually rotating the
n-coder. press the n-coder to confirm the function selection. after setting the
appropriate value of the function, press the n-coder to return to the work
screen.
2 / 4 stroke mode
N-coder
Back button
home button
N-coder
Back button
home button
TIG DC LIFT
- Setting the 4-STROKE function
the function indicates how the welding process is activated. When using
this mode, it is necessary to press the torch button, which sends a signal to
activate the welding process. the pre Gas function is then activated, follo
-
wed by start curreNt. When the button is released, the welding process
starts by switching to WeldiNG curreNt and activating other active func
-
tions gradually. to complete the welding process, press the torch button
again to activate the doWN slope function and then the eNd curreNt
function. When the button is released, the welding process is terminated
and the post Gas function is activated. the function can be modified when
selecting a method (see description above) or during operation on the work
screen. activation on the work screen is done by pressing the back button.
the function is selected by gradually rotating the n-coder. press the n-coder
to confirm the function selection. after setting the appropriate value of the
function, press the n-coder to return to the work screen.
2 / 4 stroke
N-coder
Back button
home button
N-coder
Back button
home button
TIG DC LIFT
- Setting the POST-GAS function
this function ensures the protection of the weld after the welding process.
the function can be modified when selecting a method (see description abo
-
ve) or during operation on the work screen. activation on the work screen is
done by pressing the back button. the function is selected by gradually rota
-
ting the n-coder. press the n-coder to confirm the function selection. after
setting the appropriate value of the function, press the n-coder to return to
the work screen.
N-coder
Back button
home button
