23
Control Knob
18. Lighting Instructions
n
BEFORE EACH USE: Inspect gas hose under unit. If
it is evident there is excessive abrasion or wear, or
the hose is cut, please contact Evo for a replacement
hose.
Electronic Ignitor Lighting Procedure:
1.
Read instructions carefully before lighting.
2.
Cooking surface must be in place and secure before
lighting.
3.
Hold down the igniter button, then turn the Control
Knob to ‘Stet’. View the flame through the viewing
holes in the Grill body to confirm it is lit. If the burner is
lit, turn the knob to ‘the desired setting to commence
cooking.
4.
If ignition does not occur in 5 seconds release igniter,
turn the burner Control Knob off, wait 2 minutes, and
repeat lighting instructions.
If after repeated attempts and the burner does not ignite,
follow the manual lighting procedure below.
Manual Match Lighting Procedure:
1.
To light the burner manually, feed a lit match through
one of the flame viewing holes in the burner skirt above
the control panel until it is close to the burner.
2.
Turn the right-hand control knob (outer burner) to the
‘Lite’ position. View the flame through the opposite
viewing hole in the grill body to confirm it is lit. If the
burner is lit, turn the knob to the desired setting to
commence cooking.
3.
Once the outer burner has been lit, remove the match
and extinguish the match flame.
4.
Turn the left-hand control knob (inner burner) this will
then cross light from the outer burner.
Igniter Button
To Match Light
Summary of Contents for AGA AGA-10-0096-LP-CE
Page 31: ......
