EVN SmartHome Wandthermostat Plus, Operating Manual

Page: 20 / 31

38 39
9. Installation in multiple combinations
You can mount the EVN SmartHome Wall The
with the attachment frame provided or use it with frames
of other manufacturers as well as integrate the electronic
unit into a multi-gang frame. In both cases, mounting with
adhesive strips and screws is possible. For mounting with
multiple combinations, make sure that the mounting pla-
te of the EVN SmartHome wall thermostat is seamlessly
aligned to the already fixed mounting plate/retaining ring.
The EVN SmartHome Wall The is designed to
fit into frames supplied by the following manufacturers:
Manufacturer Frame
Berker S.1, B.1, B.3, B.7 Glas
ELSO Joy
GIRA System 55, Standard 55, E2, E22, Event, Espirit
merten 1-M, Atelier-M, M-Smart, M-Arc, M-Star, M-Plan
JUNG A 500, AS 500, A plus, A creation
• Use a pen to mark the positions of 2 bore holes
A
(dia-
gonally opposite) in the mounting plate on the wall. The
bore holes
B
can be used for installation with a flush-
mounting box.
A A
B
B
• If you are working with a stone wall, drill the marked two
5 mm holes and insert the plugs supplied. If you are wor-
king with a wooden wall, you can pre-drill 1.5 mm holes
to make screws easier to insert.
• Use the screws and plugs supplied to fasten the moun-
ting plate to the wall.
• Attach the wall thermostat with the frame on the moun-
ting plate. Make sure that the arrows
on the back side of the wall thermo-
stat point upwards and that the clips
on the mounting plate latch into the
openings on the wall thermostat.