34
35
4. Safety instructions
This device is not a toy; do not allow children to play with
it. Do not leave packaging material lying around, as it can
be dangerous in the hands of a child. Do not open the de-
vice: it does not contain any components that need to be
serviced by the user. In the event of an error, please return
the device to our service department.
5. Instructions for disposal
Do not dispose of the device with regular domestic
waste!
Electronic equipment must be disposed of at local
collection points for waste electronic equipment in
compliance with the Waste Electrical and Electronic
Equipment Directive.
The CE Marking is simply an official symbol relating
to the free movement of a product; it does not war-
rant a product’s characteristics.
Used batteries should not be disposed of with
regular domestic waste! Instead, take them to
your local battery disposal point.
6. Inserting (replacing) batteries
1. As-delivered condition
When you are starting up the device for the first time, first
remove the mounting plate (A) on the rear of the wall ther-
mostat (C).
• To do this, hold the EVN SmartHome wall thermostat firmly
in one hand and pull off the installation plate at one corner.
2. Installed condition
Once mounted, the EVN SmartHome
wall thermostat can easily be pulled out
of the frame.
• Pull the wall thermostat (C) off the wall
together with the frame by pulling side-
ways at the frame.
Change batteries
• Turn the wall thermostat (C) over to remove or insert the
batteries according to the illustration. After removing the
old batteries, please wait approx. 60 seconds before in-
serting the new ones.
• You can now enter two LR03 batteries (Micro/AAA) into
the battery compartment, making sure they are the right
way round according to the drawings
• Put the EVN SmartHome wall thermostat (C) back into
the frame (B).
An empty battery symbol (
) indicates that the bat-
teries need to be replaced. If, in addition, a V or S are
displayed, the batteries of a taught-in Heating Ther-
mostat (V) or Window Sensor (S) have to be replaced.
Never recharge standard batteries. Doing so will pre-
sent a risk of explosion. Do not throw the batteries
into a fire. Do not short-circuit batteries.
7. Setting date and time (dAt)
After inserting or replacing batteries the firmware version
number will be shown briefly. Accordingly, date and time will
be requested automatically. Settings can be changed with
the (
+
) and (
-
)
buttons and confirmed with the OK button.
Summary of Contents for SmartHome Wandthermostat Plus
Page 30: ...58 59...
Page 31: ...60...
