Evinrude E-TEC G2, Manual

Page: 37 / 92

35
Tilting and Trim
Manual Tilt Models
IMPORTANT: Use the tilt grip to tilt your out-
board. Do not use the tiller handle as a lever.
Tilt UP
Move the tilt/run lever to TILT position.
Grasp the tilt grip on engine cover and tilt out-
board to the full tilt position.
The tilt support bracket will automatically en-
gage.
Tilt DOWN
Move tilt/run lever to RUN position.
Grasp the tilt grip on engine cover and raise
outboard slightly. The tilt support will automat-
ically disengage. Slowly lower outboard to its
normal operating (RUN) position.

WARNING
Leave tilt/run lever in the TILT position
while outboard is tilted. If the tilt/run
lever is moved to the RUN position, the
tilt support bracket can release and the
outboard could drop down unexpectedly.
1. TILT position
007022
1. Tilt grip 007023
1
1
1. Tilt support bracket
007025
NOTICE
Operate outboard in normal operating
position with tilt/run lever in the RUN
position.
1. RUN position
007024
1
1