Evinrude 2004 75 E-TEC, Manual

Page: 32 / 60

30
Using Your E-TEC Outboard
ROUTINE INSPECTION CHECKLIST
Common Sense Pre-launch Checks (Each Use)
Periodic
Check fuel level.
Check function of steering, throttle, shift, and emergency stop circuit and lanyard.
Check condition of propeller.
Confirm operation of System Check self-test and warning horn.
Confirm the cooling system is operational (water intake screens and water pump
indicator).
Confirm this Operator’s Guide is onboard and readily accessible.
Check condition of anti-corrosion anodes (annually or every 100 hours).
Check for debris on propeller.
Clean and wax upper and lower engine covers (annually or every 100 hours).
In salt water applications, check lubrication points and corrosion protection. Use
Evinrude anti-corrosion spray or Evinrude “6 in 1” multi-purpose lubricant (annually or
100 hours).