Use manual alignment mode to step through the
LEDs one by one. One by one, bend each LED
down with your finger until it points in the right
direction to form a shadow of the gnomon.
(Try not to touch other parts of the circuit board.)
Ideally, each shadow will look something like this.
However, you should expect there to be variation,
and (initially) poor alignment of some LEDs.
[Bulbdial Assembly Guide]
STEP 27: Putting hands on the clock
[32]
12
6
3
9
(Idealized shadow)
In the next step, we’ll deal with a less ideal case.
