E2632
Rev 17.05.2021
Connections
1. Unscrew four lid screws and detach the lid from the device;
2. Attach the device to the wall using provided screws through the side mounting holes or
key slots (This step may be done before step 1, consider your convenience).
3. Use two M16 cable glands to let in the cables of the power supply and of the external
devices to each sensor.
Connect the power terminals N and L to the 24 V AC/DC source if you are using detector
version -24 or to 230 V AC mains if you are using detector version -230 (see diagram
below).
Terminals
RE1 NO
Relay 1, normally open terminal
RE1 COM
Relay 1, common terminal
RE1 NC
Relay 1, normally closed terminal
RE2 NO
Relay 2, normally open terminal
RE2 COM
Relay 2, common terminal
RE2 NC
Relay 2, normally closed terminal
L
90…265 VAC Phase (optional 24 VAC / VDC)
N
90…265 VAC Neutral (optional 24 VAC / VDC)
8