31
Figure 3.3
Change the following to match the hard disk settings when entering in
this information manually. Refer for the hard drive manufacturer
documentation for details.
Access Mode:
The settings for this item are:
Auto CHS, LBA and
Large.
Cylinder:
Provide the number of cylinders for the hard drive.
Head:
Provide the number of heads for the hard drive.
Precomp:
Enter the Write Precomp value.
Landing Zone:
Enter the Landing Zone value.
Sector:
Provide the number of sectors.
Drive A
Select the appropriate device for Drive A. Set this function to one of the
configuration options:
None, 360K/5.25in, 1.2M/3.5in, 370k/3.5in,
1.44M/3.5in or 2.88M/3.5in
.
Video
Select the appropriate video device. Set this function to one of the
configuration options:
EGA/VGA, CGA 40, CGA 80 or Mono
.
Halt On
This setting determines at which point the boot up process will be
stopped in the event errors happen to occur. Set this function to one of
the configuration options:
All Errors, No Errors, All But KB, All But
Diskette or All But Disk/Key
.
Advanced BIOS Features
The following information is provided as a reference for the Advanced
BIOS Features of this motherboard. See Figure 3.3 below.
Anti-Virus Protection
This feature provides a WARNING in the event if an attempt is made to
write data to the IDE hard disk boot sector. If enabled, a warning
