background image

14

Compliance Information

Macrovision Product Notice

Trademark Information

FCC Compliance Information

This device complies with FCC Rules Part 15. Operation is subject to the following two conditions:
This device may not cause harmful interference, and this device must accept any interference received, including interference that may 
cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to 
Part 15 of the FCC Rules. These limits are deigned to provide reasonable protection against harmful interference in a residential installation. 
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the 
manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference 
will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following 
measures:
Increase the separation between the equipment and signal source. Connect the equipment to an outlet on a circuit different from that to 
which the signal source is connected.
Consult the dealer or an experienced computer technician for help. The use of shielded cables for connection of the monitor to the graphics 
card is required to ensure compliance with FCC regulations. Changes or modifications to this unit not expressly approved by the party 
responsible for compliance could void the user’s authority to operate the equipment.

CE Compliance Information

EMC Directive 89/336/EEC and Amendment 92/31/EEC, Class B Digital Device EN 50081-14, Generic Emissions Standard for Residential, 
Commercial and Light Industrial Products (EN 55022/CISPR 22, Limits and Methods of measurement of Radio). (EN 55022/CISPR 22, 
Limits and Method of Measurement of Radio Interference Characteristics Information Technology Equipment) Warning: This is a Class B 
product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate 
measure. EN 50082-1, Generic Immunity Standard for Residential, Commercial and Light Industrial Products (IEC 801-2, IEC 801-3, IEC 
801-4)

This product may incorporate copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use 
of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only 
unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. 

2001-2010 EVGA Corp. EVGA, the EVGA logo and combinations thereof are trademarks of EVGA Corp. All brands and companies are 
trademarks of registered Trademarks of their respective companies. EVGA reserves the right to terminate this license if there is a violation of 
its terms or default by the Original Purchaser. Upon termination, for any reason, all copies of the Software must be immediately returned to 
EVGA and the Original Purchaser shall be liable to EVGA Corp. for any and all damages suffered as a result of the violation or default.

English

Summary of Contents for 50081-14














Reviews: