EVGA 131-CL-E499 Specs And Initial Installation Download Page 141

Page: 141 / 165

EVGA Z490 DARK (131-CL-E499)

- 141 -

Installing Drivers and Software

Note:

It is important to remember that before installing the drivers included in the
kit, you must first load or install your operating system. The motherboard
natively supports 64bit versions of Windows 10.

The kit comes with a USB flash drive that contains utilities, drivers, and

additional software.
The USB flash drive that has been shipped with the EVGA Z490 DARK

Motherboard contains the following software and drivers:



Chipset Drivers



Audio Drivers



EVGA NU Audio Drivers



RAID Drivers



LAN Drivers



ME Drivers



Intel

HD Graphics Drivers



EVGA ELEET X1



User’s Manual

Windows 10 Driver Installation

Insert the USB flash drive included in your EVGA Z490 DARK

motherboard kit into a USB port on your case or a USB port on the

motherboard’s rear I/O panel.

Double-click the “Autorun” application file.

Summary of Contents for 131-CL-E499






































































































































































Search results

Summary of Contents for 131-CL-E499

Reviews:

Related manuals for 131-CL-E499

Brands by name

Popular brands

EVGA 131-CL-E499, Specs And Initial Installation

Search results

Summary of Contents for 131-CL-E499

Reviews:

Related manuals for 131-CL-E499

Brands by name

Popular brands