EVGA 131-CL-E499 Specs And Initial Installation Download Page 101

Page: 101 / 165

EVGA Z490 DARK (131-CL-E499)

- 101 -

Realtek HD Audio Manager

The Z490 DARK uses a 7.1 Channel Realtek ALC1220 audio controller. This section

will cover installation of the controller (in Windows 10) and the basic configuration

options that are available in the software.
To begin, use the drivers on the included USB flash drive or download the current

Realtek drivers from

https://www.evga.com/support/download

. Once downloaded,

right-click to extract the file and run the correct driver for your operating system. Once
launched, select “Next” on the extraction window, “Next” on the installation window,

then select “Yes, I want to restart my computer now.” Click “Finish.”

Summary of Contents for 131-CL-E499






































































































































































Search results

Summary of Contents for 131-CL-E499

Reviews:

Related manuals for 131-CL-E499

Brands by name

Popular brands

EVGA 131-CL-E499, Specs And Initial Installation

Search results

Summary of Contents for 131-CL-E499

Reviews:

Related manuals for 131-CL-E499

Brands by name

Popular brands